Waterproof Car Rear Vehicle Backup View Camera High-definition Cmos 170

 

Waterproof Car Rear Vehicle Backup View Camera High-definition Cmos 170 Degree Viewing Angle E363

 

Item Description

This reversing camera is excellent for Car, MPV, Truck or Lorry, with color , produce beneficial image on your screen. Functions:1. High-definition and 170 degree viewing angle2. Built-in guideline for instant distance calculation3. Versatile compatibility can be connected to any sort of monitor4. Appropriate for safety and security5. Waterproof and can be installed on your license plate6. Appliacable to all type of vehicles.7. Simple and easy installation and can be installed in various techniques.eight. Made of high good quality and durable materialNote: This camera has a standard image which can be adjusted on the monitor connected with it.Specifications:Image Sensor: Color CMOS Imaging Device: OV7950(CMD)Successful pixels: NTSCPixels: 656 × 492 pixels (.3 MEGA)Scanning Technique: two:1 interfaceSync System: InternalHorizontal resolutions: 420 Television linesSensor area: five.961mm4.276mm Minimum illumination: .2Lux/F1.eight ( Lux with LED)Video output: RCA connector, 1.0vP-P, 75ohmS/N Ratio: Even more than 48dbWaterproof: IP67-IP68Power consumption: 60mAPower supply: DC12V±10%Operating temperature: -20°C- 60°C RH95%MAX Storage temperature: -30°C- 60°C RH95%MAX Dimention:444025mmPackage: 1 x Vehicle rear view camera 1 x Power cable (1.2M) 1 x Video cable (5M) two sets Screws/Nuts

Product Details

• Shipping Weight: 0.6 ounces (View shipping rates and policies)
• ASIN: B005CTKYB4
  

Technical Details

• Waterproof Car Rear Vehicle Backup View Camera
• 170 degree viewing angle
• Color CMOS
• Night Vision
• perfect for Car, MPV, Truck or Lorry, with color

Client Reviews

For the cash you have to give it 5 stars. I have read all of the other reviews and would say that it is always achievable to get a defective part these days. At all times invest in from Amazon and you can simply return it for a refund or exchange. No, I do not work for Amazon, as I am a retired Engineering Professor. The installation is easy and if you have the proper tools it should really take much less than 2 hours to entirely install. If you are not familiar with operating on cars, then hire a expert installer to do it. Make confident that your video unit is equipped with either the video backup trigger for backup camera installation or separate video input. If you do not want to install it beneath the trunk lip and want to install it on a surface mount then all you have to have to do is remove the screws from the mount and rotate it 180 degrees.
OK back to the camera and installation on my 2010 Mercedes S400. I had purchased a kit from MidCity Electronics to give me the video feed to my LCD OEM screen. That took only about 30 minutes to install. The camera took longer due to the fact I had to get rid of the interior trim from the trunk to eliminate the plastic piece below the trunk lid. I drilled a hole for the camera head to fit through the plastic and then mounted the camera utilizing hot glue. This is hidden on the back side of the plastic piece and will permit for very easy removal if I have to have to install one other camera. The powder feed was gotten from the rear of the automobile employing a fused 5 amp/12 volt position on the circuit breaker. Due to the fact the electronics from the Mercedes automatically senses that there is a rear camera installed, I did not require the backup light voltage to trigger the camera. This function is handy simply because the Video In Motion from MidCity can be triggered though driving to see behind your car. Operating the video wire to the front took about 20 minutes to get rid of door sill plate trim and get wire fed by way of to front connection behind the video unit. When accomplished and tested (Yes, please test prior to you place anything back together to assist you save time if some thing does not function appropriate), it will take you about an hour or less to put all the trim pieces back on and make a final adjustment to the angle of the camera. It is extremely handy to have the adjustment screws visible below the trunk lip for this reason. I adjusted the camera angle downward so that I could just see the edge of my bumper. The rear image is not distorted and I am really pleased with the outcomes. Once happy, use the hot glue to place a fairly smaller dab of glue onto the screw head to maintain it from getting loose or use some lock-tite on the treads.
I would have liked to have the option of removing the backup grid overlay considering that it does not match up appropriately with the Mercedes self-imposed lines. In spite of this, the camera solution with the MC unit was $200, so for the dollars, I can live with the lines till this camera wants replaced.
An extra tip is to use a 9 volt battery to test your video camera ahead of you install it. The 9 volts is adequate to power the camera and you can attach the leads with a smaller bit of tape. You can use the video out to your Tv or any monitor that enables for the RCA video input. I employed the small video monitor sold by Amazon for ~$20 to preview my installation prior to I began. It also allowed me to compare two various cameras with the very same lighting to make my choice of the superior one. Hope this assists.

Got this to replace my license plate camera which would fog up or distort. This 1 right here is all metal, little and even with a solid water on it, in no way had any condensation in lens. Nicely worth it.

View